|
2.Welding rapid, do not hurt the insulating layer is not deformation.
3.Many types of welding mode, constant voltage, constant current, constant power. According to select the appropriate mode of different products.
4.The controller with built-in pressure detection function, welding pressure can be monitored in real time, and can display real-time waveform.
5.63 groups of welding parameter recording, convenient replacement model.
6.With track automatic operation, save manpower.
7.Powerful recording function, all states record in the welding process.
|
机种/Type |
变频式电枢点焊机/ Inverter spot welder armature | |
|
型号/Model |
ZUHQ(S)1 | |
|
操作特性/ Operating features
|
槽式Slot / 钩式 Hook | |
|
电枢绕组线径/Armature diameter |
φ0.1～φ1.0 | |
|
电枢组矽钢片外径/Silicon steel diameter |
φ25～φ80 | |
|
整流子外径/Commutator diameter |
φ15～φ40 | |
|
电枢轴外径/Armature shaft diameter |
φ2.3～φ15订货时指定标准三种/ 3 specify standards of ordering | |
|
整流子槽数/Commutator bar |
99槽以内/In 99 points | |
|
电气特性/ Electrical features
|
输入电力/Input power |
3相4线/3 phase 4 wire AC380V 50HZ |
|
额定容量/Rated capacity |
20KVA | |
|
放电频率/Discharge frequency |
2000HZ | |
|
记忆频道/Memory channel |
63 | |
|
加压（预压）时间/ Pressure (preload) time |
0～9999msec | |
|
保持时间/Holding time |
0～9999msec | |
|
熔接1控制/Weld 1 control |
电流Current/电压Voltage/功率Power、三种Three types | |
|
熔接2控制/Weld 2 control |
电流Current/电压Voltage/功率Power、三种Three types | |
|
缓升1/Slow rise 1 |
0～99msec | |
|
焊接1/Welding 1 |
0～300msec | |
|
缓降1/Slow down 1 |
0～99msec | |
|
冷却/Cooling |
0～99msec | |
|
缓升2/Slow rise 2 |
0～99msec | |
|
焊接2/Welding 2 |
0～300msec | |
|
缓降2/Slow done 2 |
0～99msec | |
|
焊接回数（脉冲数）/Pulsation coun |
0～9次/COUNT（S） | |
|
阶段电流/Phase current |
12组/Sets | |
|
主开关方式/Switch mode |
IGBT | |
|
电流调整范围/Current adjustment range |
0～9999A | |
|
绝缘等级/Insulation level |
B | |
|
负载持续使用率/Load sustained rate |
40% | |
|
100%时的标准功率/Standard power of 100% |
20 KVA | |
|
最大电极力/Maximum electrode force |
1528N | |
|
次级空载电压/2nd no-load voltage |
13.5V | |
|
机械特性/ Mechanical features
|
主电极压力/Main electrode pressure |
10～100Kgs |
|
二次压力/2nd pressure |
10～100Kgs | |
|
负电极压力/Negative electrode pressure |
10～30Kgs | |
|
加压方式/Pressure mode |
||
|
转极种类/Indexing type |
伺服定位Servo positioning 0～99等份Points | |
|
转极方式/Indexing mode |
||
|
压缩空气/Compressed air |
4～6kg/cm2 | |
|
冷却水量/Cooling water |
6L＼min | |
|
尺 寸/Size: W*D*H(mm) |
800*765*1760 | |
|
净 重/Weight |
420Kg | |
